Cement Brick Making Machine

Cement Brick Making Machine


details

QT6-15 is Cement brick making machine is fully automatic with PLC (Programmable Logic Controller) intelligent control.The control system of brick making machine is equipped with SIEMENS PLC, production program,Cement tile machine malfunction diagnosis system and remote control function,easy for operation and maintenance.Main forming machine equipped with a basic Face-mix device,Brick Making Machine it can make the double layer paving stone just by changing the mould.Concrete roofing tile machine The whole production can start from Concrete batching machine,with accurate PLY300 batching controller,which can weigh the material according to customer’s requirement.After material batching,Cement Brick Making Machine the material will enter JS500 Twin-shafts concrete mixer,cement will come from cement silo or bag cement,mixed with crushed stone and sand.After mixing, concrete block making machine china the mixed material will be transfferred to the material storage hopper of QT6-15 cement brick forming machine.  

Technical specification of this Cement Brick Making Machine

QF6-15 Cement brick making machine Specification

Pallet size

mm

980×680×20

Cycle time

S

15-23

Rate Pressure

Mpa

25

Vibration force

KN

68

Power

KW

26.7

Weight

T

7.2

Vibration frequency

r/min

3800-4500

Dimension

mm

9450×3300×2700

  Raw Materials

 

Crushed stone, sand, cement,fly ash, cinder, slag, gravel, and other industrial wastes.

 

 Applied Products

Hollow  blocks, solid block,soild brick, paving stones

with or without face mix, garden and landscaping products, slabs,

curbstones, grass paver, slope blocks, interlocking paver, etc.

Output of QT6-15 Block machine (Pallet size 980*680mm)

Name

Picture

Dimension(mm)

QT6-15 
(pc/mould)

Hollow block

 

400x200x200

6

Hollow block

 

400x150x200

8

Solid brick

 

220x70x100

28

Rectangular paver

 

200x100x60  

24

Ripple shape paver

 

225x112.5x60

15

Square shape paver

 

250x250x60

6

Detail introduction of QT6-15 Cement Brick making machine

(1 ) Vibration System

The vibrating table board of our brick making machine is made of low alloy and high strength structure steel which can bear intense vibration without being destroyed and splitted. Automatic Block Machine  The rubber springs which are densely, evenly, optimized distributed around. optimum structure of vibrating shaft eccentric parts can make the vibrating power to satisfy material feeding and molding of different block machines. Thereby it can ensure all performance indexes of the concrete products are consistent and stable.

(2) Solid Structure

The main machine adopts a movable beam,high strength steel structure, four oriented pill an elevating frame which can be adjusted according to the mold height simply and conveniently;The guide column is made of super strength seel, the surface chromium plating has high strength and wear resistance.

(3).Hydraulic system

QT10-15 Automatic block making machine use proportional electrical and hydraulic control  relief valves, which automatically adjust the oil flow and pressure as per specific working requirements, to buffer the hydraulic cylinder when working; uses integrated high-pressure and soft oil pipes, with easy installation;

(4) PLC Control system

QT6-15 uses German Siemens PLC control system and Siemens Touch Screen.
With human-computer interface screen, easy operation;Dynamic display of the system’s status, automatic trouble shooting and warning notice;
with advanced logical safety lock function, avoiding mechanical accidents caused by operational mistakes.

 

(5) Feeding cart

The feeding way uses forks to swing raw materials, with the advantages of feeding quickly and high density for solid bricks,hollow and standard blocks

(5)Mould

For the mould used in QT6-15,the mould frame is made with inlaid structure, and mould are processed via the procedures of carburizing, nitriding and quenching which guarantee the strength of mould core and mould surface could be HRC52-HRC62.

 

Application of this Cement Brick Making Machine

1. QT6-15 cement paver making machine working at site

2.QT6-15  paver making machine makes Top-color paving stone at site.Paver size at 250*250*60mm, at 6pcs per mould.

 

Our Service

Pre-sale service support

According to every customer's demand and budget, we offer the professional  factory set up solution, factory layout design, process flow design. More importantly, we welcome every customer to visit our factory and visit our customer site before placing the order

On-sale service support

Assist clients to finish the factory planning,like foundation construction, power preparation,water pool preparation,etc. Before delivery equipment to customers, complete debugging and checking,our machine will do hot testing in workshop with material. Provide a full instruction manual for the block making machine. Provide technical guidance for the installation , including installation advice and electrical connection.  
After-sale service support

Send technicians to installation site for the guidance, equipment commissioning and training. Provide high-quality spare parts thoughout the year, and the maintenance technicians are always ready to provide technical help.

 

FAQ:

 

 

LEAVE YOUR MESSAGES

Send Inquiry Now