QT10 Automatic concrete block machine

QT10-15 block making machine with motor vibration,frequency controlled.It is mainly produce different size of hollow block,porous brick,solid brick,curb stone,paving brick,grass-pavers,tree-planted brick and slop-protected brick etc.


details

 

QT10-15 block making machine with motor vibration,frequency controlled.It is mainly produce different size of hollow block,porous brick,solid brick,curb stone,paving brick,grass-pavers,tree-planted brick and slop-protected brick etc.If top-color paving stone is required, the machine should be fitted with a face-mix device.Characteristics:Our block making machine is integrated with mechanism, electric system,concrete block machine and hydraulic system.Automatic concrete block machine It is well-designed, compact structure, easy to operate and high efficiency. It conforms the standard requirement of GB/T8533-1998 <small block making machine > and JC/T920-2003 <construction industry block forming machine>. The forming of blocks are finished by vibration and pressing,Automatic block machine which mainly depends on hydraulic pressure and with assistance of mechanism.Concrete Block making machine It can also take advantages of various kinds of waste residue to reduce the using amount of cement and produce all kinds of load-bearing and unload-bearing blocks which meet the quality requirements.QT10 concrete block machine The block products made by our brick making machine are with the same dimension, stable quality, high density, fully automatic concrete block machine and the compression strength are over 15 MPa. Meanwhile the blocks are freeze-proof, leak-proof, sound-proof, and heat-proof.  

Technical specification of this Automatic concrete block machine for South Africa

Pallet size

mm

1100&times;950&times;28

Cycle time

S

15-23

Rate Pressure

Mpa

31.5

Vibration force

KN

105

Power

KW

48.9

Weight

T

14.5

Vibration frequency

r/min

3800-4500

Dimension

mm

11500&times;4050&times;2800

  Raw Materials

Crushed stone, Sand, cement, fly ash, cinder, slag, gravel, and other industrial wastes. 

 Applied Products

Hollow  blocks, solid block,soild brick, paving stones

 with or without face mix, garden and landscaping products, slabs,

 curbstones, grass paver, slope blocks, interlocking paver, etc.

Applied Fields

widely used in buildings, road pavings, squares, gardens, landscaping, city constructions, etc.

Output of QT10-15 Block making machine (Pallet size 1100*950mm)

Name

Picture

Dimension(mm)

QT10-15 
(pc/mould)

Hollow block

 

400x200x200

10

Maxi Brick

 

220x90x115

32

Triangular

Diagronal 250x60

16

Bat Shape

230x140x60

24

Rectangular paver

 

200x100x60  

24

Ripple shape paver

 

225x112.5x60

15

Square shape paver

 

250x250x60

6

The Critical parts of block making machine is Vibration system.

For the Vibrating box and vibrating table in our machine,it adopts the suspension integrated design structure. The vibrating table board is made of low alloy and high strength structure steel which can bear intense vibration without being destroyed and splitted . The rubber springs which are densely, evenly, optimized distributed around not only improve effect of vibration reduction for block machine, but also insure every point on the vibration table board has consistent vibrating acceleration and swing, so as to ensure the even vibration effect, ensure the consistency of concrete product height and evenness of density. Meanwhile, it also reduces the vibration noise (about 10 decibel.)

The rubber springs were placed on the vibration table of our block making machine, in order to prevent the vibrating table from declining, four knock-down orientation device with shaft and sheath slipping cooperation are installed at the four corners of the vibrating table. This can keep the vibrating table from moving at the horizontal direction during vibration.

Below are the qualified products made by our machine

Hollow block at 390*90*190mm made by our QT10-15 block making machine in Viet Nam
Hollow block at 390*90*190mm made by our QT10-15 block making machine in Viet Nam
Rectangular paver at 200*100*60mm paver made by our QT10-15 paver making machine
Rectangular paver at 200*100*60mm paver made by our QT10-15 paver making machine

 

Concrete curb stone made by our QT10-15 block,curb stone making machine
Concrete curb stone made by our QT10-15 block,curb stone making machine
Overview of the whole QT10-15 block making factory
Overview of the whole QT10-15 block making factory

 

FAQ:

 

 

LEAVE YOUR MESSAGES

Send Inquiry Now