QT5 Paver Making Machine
I. Brief Introduction
Hawen QT5-15 Concrete paver/block making machine,using German SIEMENS PLC Control system and SIMENS Touch Panel,SIEMENS vibration motor,color paver making machine with powerful vibration and high automation. Customer can make various types of concrete products such as hollow block,interlocking paver,curb stone ,solid brick,solid block by changing the moulds.
Feature of QT5-15 Concrete paver/block making machine:
1. With Frequency conversion technology,the vibration frequency can be changed according to different raw material and different types of concrete products.
2. With Frequency inverter, automatic Paver Making Machine vibration speed can be increased or decreased in short time, QT5 Paver Making Machine which greatly save the cycle time thus to increase the production capacity
3. With Double proportional valve in hydraulic tank,cement brick making machine the flow and pressure can be setted from the touch panel of block making machine,easy for operation.
4. All the production parameters can be set from touch panel,concrete batching plant manufacturers the PLC software can be upgraded or amended to maximize the production output.
5. Mould can be changed quickly if customer wanna make different types of products.
The whole production line including:PL800-2 Concrete batching machine, JS500 Concrete Mixer, Main forming machine, Automatic Block Stacker.
An auto. Face mix device can be added to to make top-color paving stone.
Crushed stone, sand, cement, fly ash, cinder, slag, gravel, and other industrial wastes etc..
II. Technical specification:
QT5-15 block making machine Technical Specification
Crushed stone, sand, cement, fly ash, cinder, slag, gravel, and other industrial wastes.
Hollow blocks, solid block,soild brick, paving stones
with or without face mix, garden and landscaping products, slabs,
curbstones, grass paver, slope blocks, interlocking paver, etc.
III. Output of QT5-15 Block/paver machine (Pallet size 1100*580mm)
Ripple shape paver
Square shape paver
II. Detail introduction of QT5-15 Paver/Block making machine
(1 ) Vibration System of block making machine
Vertical vibration force driven by eccentric synchronous revolution structure makes the materials feeding and forming better.
Vibration table places on the optimizing distributed rubber springs for better vibrating and anti-vibrating and low noise.
Fixed structure let the table generate knocking during forming which can improve the density of the concrete products.
(2) Solid Structure of block making machine
The integrated structure consist of feeding cart , hopper frame and rack frame. The steel of main frame is superior Q235A, featured with fine inflexibility, high strength and less error, with thickness at 8mm. All the four pillars with special tooling positioning,it is interchangeable.
(3).Hydraulic system of block making machine
The double vane pump is world famous brand “Yuken” to coordinate proportional valve,the vibration amplitude and frequency could be adjusted freely. With proportional valve, the flow and pressure of each movement could be adjusted on touch panel according to actual situation, even to set stage speed in the same movement, making machine running quickly and without impact. Pilot operated check valves installed in pressing head ensure the reliability and safety of pressing head movement. Even if the leakage caused by wear and tear, due to the locking from pilot operated check, the pressing head will not fall down when demoulding or maintenance. What is more,in the case oil pump off and button maloperation., the pressing head will not fall down.
(4) PLC Control system
The PLC controls each production procedures with Siemens touch panel & Siemens Programming or E-view touch panel & Mitsubishi PLC, both in English and Chinese. The electrical components of the control system use well-known international brands, such as SIEMENS,ABB, etc., to ensure the stability of the control system, and theoperating parameters of the system can be modified by the touch screen.
(5) Feeding cart
The feeding way uses forks to swing raw materials, with the advantages of feeding quickly and high density forpaver bricks,hollow and standard blocks.
IV. Application of QT5-15 Paver/block making machine
QT5-15 block making machine working at site
QT5-15 block making machine to make hollow block at 400x200x200mm at 5 pcs per mould